What will affect the work of the crusher parts?

Crusher in the use of the process, if not timely and reasonable to take some protective measures will lead to crusher equipment is easy to corrosion or in the process of use prone to failure, thus affecting the efficiency of the crusher to achieve the expected results. So, what factors will affect the crusher parts? Here are some of the factors.

Here is the content list:

• Temperature effects on the crusher

• The impact of impurities on the crusher

• The effect of corrosion on the crusher

Temperature effects on the crusher

In operation, crusher parts have their normal range of temperature. Crusher in the process of use, one to prevent low temperature for overload operation, to ensure that the normal operation of the low-speed pre-temperature stage, so that the machinery to reach the prescribed temperature before driving or work, do not because of the time does not appear to be a problem and ignore it's important to do; two to prevent the machinery in high-temperature operation, machinery running process to frequently check the value of various temperature table, found problems immediately stop to check, found fault even troubleshooting. For a moment to find the reason, never without treatment and still make machinery work with disease. In the usual work, pay attention to check the working condition of the cooling system. For water-cooled machinery, the daily work must be checked before adding cooling water; for air-cooled machinery, it is also necessary to regularly clean the dust on the air-cooling system to ensure that the cooling air ducts are smooth.

The impact of impurities on the crusher

Mechanical impurities generally refer to dust, soil, and other non-metallic substances and crusher in the process of use since the rise of some metal chips, wear products, etc. Once these impurities enter the crusher parts and reach between the mating surfaces of the machinery, the harm is great. Not only make the relative movement out of the block, accelerate the wear of the parts, but also will scrape with the surface, damage the lubricant film, make the parts temperature rise, lubricant deterioration. According to the determination, the lubricating oil in mechanical impurities increases to 0.15%, the engine first piston ring wear degree will be 2.5 times larger than the normal value; rolling bearing into impurity particles, its life will be reduced by 80% to 90%. Therefore, for the crusher working in the harsh environment, complex conditions, one should use high quality, matching pants, and lubricants, grease, blocking the source of harmful impurities; two should do a good job of mechanical protection work at the worksite, to ensure that the corresponding crusher parts can work properly, to prevent all kinds of impurities into the mechanical interior. For mechanical failure, try to go to the regular repair place for repair. Site repair, but also to do a good job of protection measures to prevent the replacement of crusher parts in the field repair before entering the machinery by dust and other impurities pollution.

The effect of corrosion on the crusher

The metal surface and the surrounding media chemical or electrochemical reaction and damage to the phenomenon called corrosion. This corrosive effect will not only affect the normal work of the mechanical exterior equipment but also corrode the internal parts of the machinery. Such as rain in, air chemicals, etc. through the crusher parts of the external channels, gaps, etc. into the mechanical interior, corrosion machine crusher parts inside, accelerate mechanical wear and tear, increase mechanical failure. As this corrosion effect is sometimes invisible. Untouchable, easy to be ignored, and thus it's more harmful. In use, management and operators should be based on the local weather conditions at the time, air pollution, take effective measures to reduce the impact of chemical corrosion on machinery, the focus is to prevent rain and air chemical composition of the mechanical intrusion.

Good daily maintenance is the only way to extend the life of the crusher. Jianye, as an expert in mining crushing, Hyton Group Mechnical Equipment Co., Ltd. reminds everyone to always pay attention to the factors that will affect the normal operation of the crusher parts.