What affects the replacement time of crusher parts?

Crusher for material crushing, its internal parts will also be subject to the role of force and wear, with the seriousness of the war situation, the performance of these wearing parts in a gradual decline, when the wear is serious needs to replace, to restore the performance of the equipment. Here is an introduction to the factors that influence the replacement time of crusher parts.

Here is the content list:

• Related to the hardness of the feed material

• The water content of the material

• Related to Finished Particle Requirements

• Related to the material composition

Related to the hardness of the feed material

Generally speaking, the harder the material added to the crusher, the more difficult it is to crush and the greater the wear and tear on the crusher parts during the crushing process, and for the same fineness requirements, the harder the feed material the slower the crushing speed. For this situation, when crushing materials, according to the nature of different materials should be selected relative to the material accessories, to reduce the wear and tear of crusher parts and extend its service life.

The water content of the material

The size of the water content of the material added to the crusher will affect the ease of crushing. Generally speaking, if the water content of the material is large, it is easy to adhere to the inside of the equipment, and also easy to cause blockage in the process of conveying the material, in addition to the large water content, then the crusher parts are easy to rust, and then subject to wear and tear, the crusher parts are easy to fracture and other phenomena, so for the material with high humidity, it can be processed and then crushed.

Related to Finished Particle Requirements

If the required finished particle size is smaller, then the longer the crushing process, the more serious the wear and tear on the crusher parts, while the finished particle size requirements are large, then the crushing process is relatively simple and the wear and tear on the crusher parts in production is relatively light.

Related to the material composition

If the feed material contains more fines, then it will affect the crushing capacity, because the fines will affect the conveying process, and if the feed material contains impurities, it will also affect the crushing capacity of the crusher, both of which will make the crushing process longer and increase the wear of the crusher parts.

The article mainly introduces the factors influencing the replacement time of crusher parts. From the analysis, it can be seen that there are mainly four factors related to four aspects, which are related to the hardness of the feed material, related to the water content of the material, related to the requirements of the finished particles, and related to the composition of the material, all of which will increase the wear of the crusher parts and shorten the service life of the crusher parts, so different protective measures must be taken according to different situations. Welcome to Contact Hyton Group Mechnical Equipment Co.