How to maintain crusher parts in winter?

In stone production, crusher is the most commonly used equipment, coarse crushing, fine crushing, and stone shaping need to use it, the wear and tear on the equipment is also relatively large, therefore, to ensure normal and continuous production, must first ensure the normal operation of the machine, do a good job on the daily maintenance of crusher parts, especially the winter maintenance work. The bearings and lubrication system are the key components of the crusher equipment and must be the focus of the winter maintenance of the crusher and should not be ignored.

Here is the content list:

• Bearing maintenance

• Lubrication system maintenance

• Daily maintenance

• Cleaning

Bearing maintenance

In crushing and grinding production, the bearing steps of the crusher are the most easily damaged due to wear and tear, therefore, in use, care must be taken to maintain and refuel frequently to extend the service life of such crusher parts and save maintenance and replacement costs.

Lubrication system maintenance

Regular attention and timely lubrication of the friction surface can ensure the normal operation of the crusher and prolong the service life of the equipment, therefore, the maintenance of the crusher parts' wetting and changing system should not be neglected as well. Specific maintenance details are as follows: the grease added to the bearing seat should be 50-70% of the volume and must be replaced every three months; the runway of the bearing roller should be carefully cleaned with clean petrol or paraffin when changing oil; when the elbow plate is in contact with the elbow plate pad, the crusher must be injected with lubricating grease before starting.

Daily maintenance

In addition to the maintenance of important parts such as the bearings and the wetting and changing system, the daily maintenance of the crusher parts is also essential. In daily production, regular maintenance must be done to correctly handle the relationship between use, repair, and maintenance, not allowing only use without maintenance or only repair without maintenance, to ensure that the crusher parts are always in good performance condition and can be put into operation at any time, to reduce downtime and extend the service life of the equipment, to ensure continuous and effective production and achieve the ultimate goal of increasing productivity and reducing cost input.

Cleaning

Cleaning the crusher parts in the diesel engine, chassis, the appearance of the work device can play a role in removing scale and decontamination, in the cleaning process can also be found in the devices, parts damage and oil leakage parts, for the next step in the maintenance of the preliminary work. It is strictly forbidden to use high pressure and high-temperature water gun to rinse the crusher parts with high waterproof requirements, especially the electrical parts, to avoid damage.

To ensure the normal operation of the crusher parts and extend the life cycle of the crusher, as long as you do the above points, I think your machinery can be safe through the winter.