How to maintain cone crusher parts?

Compared to traditional crushers, the cone crusher has a high technological content. At the same time, it is also a very popular contemporary machine. It can crush and process a wide range of materials with high efficiency. The cone crusher works in a harsh environment and if it is used unprotected and not maintained by the user, the cone crusher is prone to many problems. To prolong the life of the cone crusher, we should pay attention to the maintenance work of the cone crusher parts. Here are some tips.

Here is the content list:

• Develop a system

• Professional care

• Regular maintenance

• Timely replacement

• Maintain lubrication

Develop a system

If you want to ensure the long-term safe operation of the cone crusher, you need to develop an equipment maintenance safety operation system, as well as the necessary maintenance tools and grease and the corresponding wear-resistant accessories, such as the mortar wall, crushing wall.

Professional care

During the use of the cone crusher parts, there should be fixed personnel in charge of the care, and the operator must have a certain technical level. Before installation, the operator must be given the necessary technical training to understand the principle and performance of the cone crusher components and be familiar with the operating procedures.

Regular maintenance

The cone crusher parts should be overhauled after a period of use. The wearing parts such as the rolling mortar wall and the crushing wall should be overhauled and replaced. The connecting bolts and nuts should be carefully checked before and after use to see if they are loose and if the lubricating grease is sufficient. The fixed condition of the slip ring should be checked frequently to prevent a large amount of dust and ore from entering the body of the equipment due to the dustproof sealing box slip ring falling off during the cone crushing operation, which may affect the operation of the equipment and even cause serious equipment failure.

Timely replacement

When the cone crusher parts need to be replaced after a long period, the main wear-resistant parts, such as the rolling molar wall and the crushing wall, should be replaced in time, and suitable materials should be selected according to the crushing material and working time of the cone crusher.

Maintain lubrication

During storage or seasonal shutdown of the cone crusher, ensure that the crusher is run at least once a month to ensure that the cone crusher parts are properly lubricated. If the crusher cannot be operated during storage, the crusher flywheel must be manually rotated 3 to 4 times to ensure that the cone crusher parts are properly lubricated. If required, grease the bearings.

The above is an introduction to how to maintain cone crusher parts and I hope it will be helpful to you. Maintenance is a relatively trivial matter, but it is these ordinary little things that affect the normal operation and service life of the equipment. Hyton Group Mechnical Equipment Co., Ltd. is a company with guaranteed quality and perfect after-sales service.